That's right Jim, no wood taken, just compression - smooth end of bit goes in the key hole. Lance Lafargue, RPT Mandeville, LA New Orleans Chapter, PTG lancelafargue@bellsouth.net -----Original Message----- From: owner-pianotech@ptg.org [mailto:owner-pianotech@ptg.org]On Behalf Of JIMRPT@AOL.COM Sent: Tuesday, January 02, 2001 12:35 PM To: pianotech@ptg.org Subject: Re: Re: "pulley" keys Newton wrote; <<"If you remove wood would not have that option.'>> Newton didn't he write that he put the flutes in the 'T' handle and used the smooth shank to "size" the hole? Jim Bryant (FL)
This PTG archive page provided courtesy of Moy Piano Service, LLC