The question is how do you measure upright damper spring pressure? Does the spring gauge previously mentioned have a hook that comes in between the hammer shanks and pulls on the spring to measure tension? If too high in comparison to the neighbors, one pushes in on the spring and re-measures? Too weak: spring out of groove and pulled between damper levers to strengthen...This all seems doable ... David I. *********** REPLY SEPARATOR *********** On 2/26/01 at 9:12 PM Ritchiepiano@AOL.COM wrote: >> >> >> > >The question is, is it worth the trouble to adjust the damper spring >tension? >In other words, how much effect does uneven damper spring tension have on >the >touch? > > >Willem > >-----Well it seems to effect it quite a bit. >Mark
This PTG archive page provided courtesy of Moy Piano Service, LLC