on 2/17/01 12:56 PM, romanop@attglobal.net at romanop@attglobal.net wrote: > David, > Michael Travis has developed a jig that is made of PVC tubing. One piece is > cut at the bottom and flared so that it fits nicely over the key. Then a > slightly smaller tube fitted with the eight ounce weight and padded with a > rubber mute large end down fits inside the first. For the record, you are describing the test blow device that was developed by Ward Guthrie. Ward made so many of these, the one Michael has was probable made by Ward himself. Kent Swafford
This PTG archive page provided courtesy of Moy Piano Service, LLC