A little higher, eh? I was lowering it, no wonder... Thanks for your reply. Gary Mc At 09:00 AM 2/14/01 -0500, you wrote: >Most likely the retaining rail needs to move a little bit higher. >That is if everything else is in good and proper order. > >That is a real crude and rude system and a real pain to get to work >right. > > Newton > >Gary McCormick wrote: >> >> Good day all, >> >> Last week there was discussion regarding adjusting sosenuto adjustment on >> Steinway grands. >> What about adjustments on a Steinway vertical? >> For example, on this piano you can hit a chord, press the pedal, and that >> chord sustains. Good so far, however, continuing to hold the pedal, if you >> run a scale, there are several notes that will catch and hold as well. Not >> many, and not all in a relative location. >> Any advice would be appreciated. >> Gary McCormick >
This PTG archive page provided courtesy of Moy Piano Service, LLC