Yamaha damper felt replacement

[Newton Hunt]

They use what glue, PVC-E I think.  You can use a VERY sharp blade to
slip between the red felt and the wood block.  Put glue on the block and
the red felt on, trip.  Put glue on the red felt and the white felt on,
trim as needed.  To trim you will need a super sharp blade, razor sharp
and preferably a blade with a flat back like a chisel.  

		Newton

> Marcel Carey wrote:
> 
> Hi and Happy Holidays to all of you. May year 2002 bring you
> everything you need to be happy.
> 
> Does anyone knows what kind of glur Yamaha uses for their damper
> felts. I've got to replace some today and was wondering what's the
> best method of removing the old: Steam, sanding, wallpaper remover etc