Customer has a Yamaha U1 with the "silent" feature. The MIDI (open face) circuit board is in the area where a dehumidifier would normally intersect it, so i'm wondering if it would be safe to install the rod LOWER than usual, which in this case would be about 6" from the bottom. This position would keep the rod (50 watts) about 4-6" below the circuit board, but would this be ok? There would be no HUmidifier installed, only the DEhumidifier and stat. I figure since the customer's in the Beach area, where the average humidity is 60-100% year round, this would keep excess moisture from condensing on the open circuit, in addition to retarding corrosion. Btw, a rear mounted DC system is not an option. Thanks in advance for tips & advice! happy twothousandtwo! Terry _________________________________________________________________ Join the world’s largest e-mail service with MSN Hotmail. http://www.hotmail.com
This PTG archive page provided courtesy of Moy Piano Service, LLC