This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Owen, I enjoy your caution, but steam voicing is less invasive than the = needle. If you want to do a single hammer, use a damp linnen cloth and a = small clothe iron or even a solder iron to zap the area that you would = have worked with the needle Joe Goss imatunr@srvinet.com www.mothergoosetools.com ----- Original Message -----=20 From: owen j. greyling=20 To: pianotech@ptg.org=20 Sent: Saturday, December 15, 2001 10:49 AM Subject: custom steaming To members of the list, Has anyone come up with a controllable method for steaming individual = hammers? I'm looking for something such as a hose connected to a steam = source, with an adjustable nozzle. I find that passing a hammer through = a blast of steam from a kettle is something I can't bring myself to do = in front of a customer. I've been thinking about this on and off for some time now, and = wondered if someone else has already invented the wheel, so to speak. Thank-you, Owen J. Greyling, RPT Kingston, ON Canada ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/73/11/5b/e1/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC