loose-pins

Clyde Hollinger cedel@supernet.com
Wed, 12 Dec 2001 07:49:00 -0500


---------------------- multipart/alternative attachment
Joe,

Since this discussion is about an upright, I assume you take out the
action simply as a matter of personal preference, since I see no danger
in leaving it in, and it doesn't really get in the way.

Regards,
Clyde Hollinger

Joe And Penny Goss wrote:

> So, usually I tune the piano first then take out the action, treat the
> tuning pins with two passes on each section (with all the windows open
> and fans going and a breathing mask so that I look like Darth Vader)
> and then make two passes with the tilter at 45 degrees (mine rests at
> that slant on the wheels) on all the treble string bridge pins.

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/9c/71/7d/e2/attachment.htm

---------------------- multipart/alternative attachment--





This PTG archive page provided courtesy of Moy Piano Service, LLC