This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Joe, We definately need more info here! What make of piano? Since when does = the "damper wire" attach to the rail? etc., etc.:-) Joe Garrett, R.P.T. ----- Original Message -----=20 From: Joe & Penny Goss=20 To: pianotech@ptg.org=20 Sent: Monday, April 23, 2001 9:11 PM Subject: brass rail Hi folks, Just needing to know tricks or repair on a double rail on an upright. Some of the damper wires are broken and there is no way to get the = screw loose that holds the damper wire on the rail.=20 Does one remove the hammer spring rail and then the section ( both the = dampers and hammers are attached to a single rail ) to repair? The last person tied wire to the hammer spring rail to work the = dampers. Sort of works O:( Joe Goss imatunr@srvinet.com www.mothergoosetools.com ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/a0/29/14/7a/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC