This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Hi folks, Just needing to know tricks or repair on a double rail on an upright. Some of the damper wires are broken and there is no way to get the screw = loose that holds the damper wire on the rail.=20 Does one remove the hammer spring rail and then the section ( both the = dampers and hammers are attached to a single rail ) to repair? The last person tied wire to the hammer spring rail to work the dampers. = Sort of works O:( Joe Goss imatunr@srvinet.com www.mothergoosetools.com ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/48/62/f3/ce/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC