----- Original Message ----- From: "Ron Nossaman" <RNossaman@KSCABLE.com> To: <pianotech@ptg.org> Sent: Wednesday, October 04, 2000 12:38 AM Subject: Re: Pin Block Torque > > Hi Terry, > First off, 0.286 is a 3/0 (000) pin. I'd be putting in 0.282 (2/0 (00)) in > a new block. snip> > Ron N > Ooops. I took these out of an opened box that was marked 2/0. Thanks for catching me. I will try some 2/0s and experiment a bit (no pun intended) more with drill sizes to find that 150 inch-pound torque range. Terry Farrell Piano Tuning & Service Tampa, Florida mfarrel2@tampabay.rr.com
This PTG archive page provided courtesy of Moy Piano Service, LLC