At 05:23 PM 10/03/2000 -0400, you wrote: >I'd like to pull on your coats about something... > >I'm regulating an action from a Baldwin grand and have run into a rather odd >situation with the rep. spring. If I set the hop to a nice positive lift, >the hammer shank will fall when I trip the jack with my finger. If I set the >spring to support the shank after tripping the jack, the hop has a serious >kick. This condition is throughout the action. > >Any ideas?... See if the hammer centers are too loose. If they are, repin a few to 5 swings and see what you get then. Susan
This PTG archive page provided courtesy of Moy Piano Service, LLC