The ONLY thing I didn't like about the Yamaha spinet was removing the action. You have to take all the keys out and tie up the abstracts (stickers) in order to do so. A real piano. Newton Farrell wrote: > > Newton. Yamaha spinet. I hear ya! I have the pleasure of > tuning a 1967 > Yamaha 37" spinet #640791 once a year. It sounds nice. The > tone is > consistent/even. Pressing a key down gives a feeling > reminiscent of closing > the door of a Rolls Royce (never done it by the way - just > feels that > nice!). Nice, smooth, even-feeling action. Quiet. I > haven't tuned this piano > for about a year now, but I am aware that I have likely > thought about it at > least a dozen times (likely more - and always in a VERY > positive manner) > over the past year. Amazing little instrument. I would > prefer owning and > playing that piano over all but a handful of vertical > pianos that I have > seen/played/tuned. > > Did I say I like the little Yamaha spinet? :-) > > Terry Farrell > Piano Tuning & Service > Tampa, Florida > mfarrel2@tampabay.rr.com > > ----- Original Message ----- > From: "Newton Hunt" <nhunt@jagat.com> > To: <pianotech@ptg.org> > Sent: Friday, November 17, 2000 12:20 PM > Subject: Re: large uprights, spinet string length > > > Having the longest strings possible will not necessarily > > give the best sound. String lengths are not nearly as > > important as is bridge, soundboard, rib and parimeter > > designs. > > > > Design, fabrication and integration are important. > String > > length is not. > > > > Some of us have had the pleasure of tuning Yamaha > spinets > > from the mid '70s. They were not loud but they had a > > wonderfully musical sound with a superb action. It is > > possible to build a $10,000 spinet but who would buy it? > > > > There was one upright piano made that was some 2-" high. > > Not exactly portable. > > > > Newton > >
This PTG archive page provided courtesy of Moy Piano Service, LLC