Changing a wire on a spinet

[Dick Beaton]

All:

Just take a piece of curtain rod.  bend the wire in half and slip it into
the rod.  Use this to hold the wire in place while you work.  Since it has
an opening on one side, it is easy to slip it off the wire when you are
ready.
Dick RPT MT

----- Original Message -----
From: Phil Bondi <tito@PhilBondi.com>
To: Pianotech List <pianotech@ptg.org>
Sent: Friday, November 10, 2000 6:27 AM
Subject: Changing a wire on a spinet


> I have been told to ask this list to find out if there is someone out
there
> who manufactures a tube that will aid someone in replacing a wire on a
> spinet without pulling the piano apart.
>
> Yes, I need one.
>
> Rook
>