John Dewey wrote" > > I have drilled a couple of these out using a left hand 3/32" drill bit in a > reversable drill. I then removed the remains with a small screw extractor or > an ice pick and tweezers. It depends on how well you get the drill centered > on the screw. If you can get a split point left hand drill bit it helps. > Get the reverse hole saw from Woodworkers Supply or wherever. Smallest size requires a 1/4" plug. There are three sizes. Using extractors is hazardous as best and ruinous at worst. New technologies work so much better, easier and safer. Newton
This PTG archive page provided courtesy of Moy Piano Service, LLC