sluggish hammers on spinet

Clyde Hollinger cedel@supernet.com
Fri, 23 Jun 2000 06:51:25 -0400


Well..........  You could be painting yourself into a corner.  Suppose the
Dampp-Chaser doesn't do the job.  Then the client will be unhappy unless you take
it out and refund the money, which of course will make *you* unhappy.  A key bit
of information you need first is this -- does the problem correct itself every
time the humidity decreases?  If so, a Dampp-Chaser is more likely to work.  If
not, some other remedy is called for.

Clyde

Dave Hall wrote:

> Try a DamppChaser.
>
> Dave
>
> At 03:37 PM 06/22/2000 EDT, you wrote:
> >I've never before encountered a spinet (in this case a 1963 W****T***) with
> >all hammers so sluggish that moving them toward the strings by hand results
> >in many floating back to rest & many at the extreme ends just staying at the
> >string.  Protek on hammer flanges showed little or no result; key bushings
> >are not binding; strengthening return springs also had little effect.  Piano
> >was not played or tuned for about 10 years. Any suggestions - aside from
> >replacing it with a decent piano? (owner says it really has a beautiful tone,
> >of course).
> >
> >Is it just a combination of factors: poorly weighted keys, weak springs,
> >nonuse, etc.?





This PTG archive page provided courtesy of Moy Piano Service, LLC