Buzzing U1

[Kristinn Leifsson]

Thanks Newton,

I hadn´t thought of this before. I´m sure it´ll come in handy some day!

Kristinn



At 17:23 19.6.2000 -0400, you wrote:
>Try pushing the string down between the agraffe pin and the
>tuning pin to increase the bearing angle.  If the noise
>disappears then you need to drive the tuning pins a bit
>deeper to increase this angle.  Usually this angle is
>excessive on most uprights but I have seen this problem on
>some grands.
>
>                 Newton