I've repined a few Wurlitzers, and pin hole depth must be measured. I think I used 2 1/4". At any rate, check the depth before you order new pins. Paul Chick ----- Original Message ----- From: <PIANO2NR@AOL.COM> To: <pianotech@ptg.org> Sent: Friday, June 16, 2000 8:57 PM Subject: Re: pinblock drilling > I have noticed too shallow pin block holes on some Wurlitzer spinets and > consoles. Loose pins will only go in so far and definitely bottom out. > > Randy Mangus,RPT >
This PTG archive page provided courtesy of Moy Piano Service, LLC