SAT II

[Dick Beaton]

Jim...
That fastener fooled me too, but it is really quite simple.
Just push the center pin all the way thru and the rest will come out easy.
Then after you change the battery just reassemble it. The center pin acts as
a lock.
I'd make sure to keep the old battery connected until the new one is
installed in order to keep power on the machine to avoid loss of memory.  I
love me SATII!
Best,
Dick RPT MT

----- Original Message -----
From: <JIMRPT@AOL.COM>
To: <pianotech@ptg.org>
Sent: Monday, June 12, 2000 7:42 AM
Subject: SAT II


> Et Al;
>  For the brave out there who have traveled this road..............As I
> understand it the fasteners that hold the BDB together may be realeased by
> pushing the center pin(?) in and they will fall inside the case. Is that
> correct?
>  Question: After the battery transplant how does the fastener go back
> together if the pin will only go back in from the inside of the case?  Or
am
> I asking the wrong question again?
>  I am planning on performing the transplant this afternoon and was
wondering
> about this.
> Jim Bryant (FL)
>