A solid tuning could certainly hold up to it but why stress it? It makes no difference if it is done before or after and I know it is solid when I leave anyway. On a grand it pounds them pretty darn good. Think of it as a "pre tune string settling". ;-) Las Vegas, NV Rob Goodale, RPT Joseph Alkana wrote: > robert goodale wrote: > > > > You didn't mention that you ran the system through the calibration mode. Beware, it gets very LOUD toward the end of it's cycle! > > Always advisable to do this BEFORE you tune it! > > > > Rob Goodale, RPT > > Las Vegas, NV > > > > Vanderhoofven wrote: > > > > > Dear Friends, > > > > > > I recently did a complete service call on a new upright Yamaha equipped > > > with a Disklavier system. > > Rob, > Just curious, why do the calibration before tuning? I do it afterward to > make sure my tuning is rock solid! > Joseph Alkana
This PTG archive page provided courtesy of Moy Piano Service, LLC