In a message dated 06/04/2000 12:23:16 PM Pacific Daylight Time, larudee@pacbell.net writes: > I'm guessing that you are talking about breakage at the pin, or do you also > let > wire off the other pin if the breakage is at the front bearing (capo or > agraffe)? Paul, When there is breakage at the pin, I usually just re-use what's there, although I have spliced on a new piece. Usual breakage due to high use is at the capo, so it's necessary to pull around about 1 to 1-1/4" from the other side of the unison, putting the knot in the front duplex. I've done literally hundreds. It's very quick. Bob
This PTG archive page provided courtesy of Moy Piano Service, LLC