A number of years ago I tuned a console that had an aluminum plate and a separation of about 1/2". The owner didn't want to spend the money to have it fixed, since I couldn't guarantee the outcome. I don't remember the age of the piano, but I think it was from the 1960's. Clyde Hollinger Daniel Jackson wrote: > Terry, > Thanks for redescribing the "bend" in the casting and the input from > Ron N. This was exactly my point. I have heard that some newer harps are > not cast iron. Is this so? My ignorance comes alive again. > I don't see how this job is something anyone could safely guarantee > beforehand. But my experience in this is slight. > Dan J in Wmbg VA
This PTG archive page provided courtesy of Moy Piano Service, LLC