HI Brian, I am not stateside, I am in the UK, but I actually make piano action parts and keys to pattern......machine finished and accurate to 0.1mm or 0.004" inches. I do this because of the problem you are now facing.......unavailability of parts for too many of the instruments I work on...old & new. If you can't find any Zimmerman parts, send me a pattern, and I will be able to make whatever it is you need.........perhaps best to write first! good luck Regards Tony Court BSc(Hons) NAMIR ----- Original Message ----- From: Brian L Jane <brianjaney@juno.com> To: <pianotech@ptg.org> Sent: Saturday, July 29, 2000 12:00 PM Subject: Zimmerman Pianos... Parts? > Greetings to the List! > > I have been off for a while... I have a question about finding a place > that deals in Zimmerman parts. I have called every piano dealer in town > and made more than a couple of searches of the Internet without any > success to find someone stateside that distributes their parts. I have a > client with one of their stubby [4'7"] grands. > > Look forward to your responses - > Brian > San Diego County PTG Chapter >
This PTG archive page provided courtesy of Moy Piano Service, LLC