Another way to get the key height spot on is to shim the key until it's slightly on the high side and then remove material from the bottom of the key by scraping or sanding. Tom Newton Hunt wrote: > > I stopped using those a few years back because my slowing > fingers couldn't handle them well. It was faster for me to > remove a .005" paper and put in a .007" paper, or the > reverse, as needed. I still have some .002" balance rail > papers which I like to use. When those are gone I will go > back to the old switchero. > > Newton >
This PTG archive page provided courtesy of Moy Piano Service, LLC