John, On the SAT III you may have different stretch options. That would explain the discrepancies. Michel Lachance, RPT 000 22:39:14 -0400 > >Hi Terry, >I used a SAT with FAC to get the figures I sent. (-11.2 and +21.4) >When I used my SAT lll, I get -19 and +22.0, like you. I mostly use my SAT >lll, >the SAT with FAC is the one in my shop, which I used. >I guess it needs a check up. >Regards, >John M. Ross >Windsor, Nova Scotia, Canada. >----- Original Message ----- >From: "Farrell" <mfarrel2@tampabay.rr.com> >To: <pianotech@ptg.org> >Sent: Sunday, January 30, 2000 8:09 PM >Subject: Re: SAT FAC numbers > > > > Woohhhaa! What is going on here? I punched in the three FAC numbers on >both > > my SAT I (FAC-equipped) and SAT III and got A0=19.0 and C8=22.0. This >is > > different from the previous two posts. How on earth can we be getting > > different results? Is this the state of AccuTuner use? Am I doing >something > > wrong? Please reply prior to my heart attack. Thanks......Argh! > > > > Terry Farrell > > mfarrel2@tampabay.rr.com > > > > > > ----- Original Message ----- > > From: "John Ross" <piano.tech@ns.sympatico.ca> > > To: <pianotech@ptg.org> > > Sent: Sunday, January 30, 2000 3:39 PM > > Subject: Re: SAT FAC numbers > > > > > > > Hi, > > > I tried your FAC #'s and I don't get your results. > > > Are you sure you are stopping the lights with the SAT set to F5, then > > > changing the octave to F6, and stopping the lights with the cents >button? > > > Stop the lights on A5, change octave to A6, then use cents button. On >the > > > C6, stop then change to C7, and stop with the cents button. > > > When you set the SAT to A4, it is actually reading A6, this is where >your > > > didcrepancy is coming in. I think if you tune it and check it with the >SAT > > > on page 0, and A4,it would show you the lights as being still. > > > I get A0 -11.2 and C8 +21.4, using your #'s. > > > Regards, > > > John M. Ross > > > Windsor, Nova Scotia, Canada > > > > > > ----- Original Message ----- > > > From: <pianolover@worldspy.net> > > > To: <pianotech@ptg.org> > > > Sent: Sunday, January 30, 2000 3:43 PM > > > Subject: SAT FAC numbers > > > > > > > > > > hi all, > > > > > > > > > > > > I just bought a used SAT II which has the FAC feature, >but > > > I'm a > > > > little stumped. I set and stored my 3 FAC stretch >numbers. > > > After > > > > that I strip muted my piano (Baldwin 40" console), and >when > > I > > > got > > > > to A4, I noticed the cents deviation was 5.8! Souldn't >A4 > > > ALWAYS > > > > be perfect at 440? So I went back and re-entered the >FAC > > > again, (i.e., > > > > tuning one string of A4 while the SAT is at "A5 and >Zero > > > cents", > > > > the up 1 octave to A6 on the SAT, then playing A4 >again, > > but > > > stopping the > > > > dots with the cents buttons) but each time, A4 was > > diviating > > > about > > > > the same amount: 5.8 cents sharp. Is this to normal >for >a > > > stretch > > > > tuning? Can I adjust the SAT to 0.0 at A-4 WITHOUT >throwing > > > all the > > > > other calculations for the stretch out of whack? BTW, >my >3 > > > stretch numbers are: > > > > F3= 17.1 > > > > A4= 5.8 > > > > C6= 3.6 > > > > > > > > -16 @ A0 to +32.4 @C8 is the low/high stretch. > > > > > > > > > > > > Thanks. > > > > > > > > Terry > > > > > > > > > > > > ______________________________________________________________ > > > > Get free Internet service and email at http://www.worldspy.com > > > > > > > > > > > ______________________________________________________ Get Your Private, Free Email at http://www.hotmail.com
This PTG archive page provided courtesy of Moy Piano Service, LLC