Steinway

David ilvedson ilvey@jps.net
Wed, 19 Jan 2000 07:54:52 -0800


Yeah, but the straight wippen works great!  I have had to do 
minimal changes to let-off and drop.  

David I.

To:             	pianotech@ptg.org
Date sent:      	Tue, 18 Jan 2000 22:22:28 -0800
Subject:        	Re: Steinway
From:           	dale  r fox <foxpiano@juno.com>
Send reply to:  	pianotech@ptg.org

> David,
> 	thosetaller let off buttons are also available through Renner.  Should
> be a sample in your parts kit.
> Dale
> 
> On Tue, 18 Jan 2000 19:11:53 EST JIMRPT@AOL.COM writes:
> > 
> > In a message dated 1/18/2000 1:16:51 PM, you wrote:
> > 
> > <<I mated the old wippen and new angled wippen side to side 
> > and they seemed identical.>>
> > 
> > David they are the same, in Renner, except for the foot. Taller 
> > letoff 
> > buttons are called for on most Renner parts change out in that era 
> > of S&S, so 
> > you are probably correct in your guess.
> > Jim Bryant (FL)
> 
> ________________________________________________________________
> YOU'RE PAYING TOO MUCH FOR THE INTERNET!
> Juno now offers FREE Internet Access!
> Try it today - there's no risk!  For your FREE software, visit:
> http://dl.www.juno.com/get/tagj.
> 


David Ilvedson, RPT
Pacifica, CA
ilvey@jps.net


This PTG archive page provided courtesy of Moy Piano Service, LLC