Derek, Take a look at http://www.primenet.com/~imatunr/ We can make a hammer to fit your needs. Joe Goss ----- Original Message ----- From: Derek Gibson <derekg@sk.sympatico.ca> To: <pianotech@ptg.org> Sent: Sunday, January 16, 2000 8:23 PM Subject: New Tuning hammers > I was just into my first tuning of the day when my tuning hammer broke > at the hammer head threads(the piano did not have tight pins, and the > hammer is only 7 years old) Believe it or not I had an old beginner > tuning lever that has been kicking around in the back of my car(I'm > usually not that organized/lucky). I will probably buy a replacement > shaft for it but I'm in the market for a new one. Anyways I've been > looking through a number of catalogues and I was wondering if anyone has > some recommendations on a good quality, heavy hammer. > > Thanks in advance, > Derek > >
This PTG archive page provided courtesy of Moy Piano Service, LLC