To add to your original question, 400 grit wet&dry sand paper - used dry. Bleach with with hydrogen peroxide in the sun (which has been covered on the list before) and polish by using a (fixed to the bench) buffing wheel. Depending on the finish you want on the sharps, here we spray with matt black from a spay can then buff up with a shoe brush. Else go with Wim's suggestion. Brian Lawson PTG Assc, MPT. Johannesburg, South Africa > In a message dated 2/28/00 2:06:14 PM !!!First Boot!!!, > mfarrel2@tampabay.rr.com writes: > > << Can anyone out there provide guidance for refinishing ebony sharps and > ivory > naturals? The ivory is in pretty good shape, just a bit of yellowing. The > sharps were rough on top and the finish was worn through in spots, so I have > stripped & sanded them with 400 grit. > > I know the ivory should be sanded, bleached, and put out in the sun - but > sand with what grits? And how to polish? I can't fathom the thought of > simply painting the sharps. What kind of a finish does the factory use? What > about staining them black and clearcoating? > > Terry Farrell > Piano Tuning & Service >> > > > Terry > > Ebony wood is beautiful in its natural state. Now that you have stripped and > sanded them, buff them with shoe polish. > > The ivories can be bleached in the sun, or under a black light. > > Willem Blees
This PTG archive page provided courtesy of Moy Piano Service, LLC