screw in damper wires

[Paul]

Lance
My error. I remember removing the screws and taping the rail up out of the
way as far as possible. I learned on the first Chickering, that putting the
rail in after the dampers was not the way to go. Hope you figured it out.
They are very nice to work with once you get the hang of it.

Paul Chick
Plainview MN
----- Original Message -----
From: Lance Lafargue <lafargue@iamerica.net>
To: <pianotech@ptg.org>
Sent: Tuesday, February 15, 2000 10:38 AM
Subject: RE: screw in damper wires


>