Hi Wim, I finally found the Footswitch at R. Shack. It works fine, but I really need to extend the cord, or it "dangles" on the ground if I'm tuning large uprights. I prefer to have my SAT at above eye level, near the pins. I like your idea about the velcro on the thumb switch! I'll have to try that next. Thanks. Terry On Thu, 17 February 2000, Wimblees@AOL.COM wrote: > Terry > > If you go to a good electronics store, you can find a thumb switch that will > work with the SAT. Take the SAT with you, so they can see what plugs you > need. I attached my thumb switch to my tuning hammer with Velcro. It is on > there all the time, but I can take it off if I want to. Since I have an SAT > III, which has the automatic sequencer on it, the only time I use the thumb > switch is when I do a pitch raise. > > Wim ______________________________________________________________ Get free Internet service and email at http://www.worldspy.com
This PTG archive page provided courtesy of Moy Piano Service, LLC