et al I going on a George Steck with Duo-Art tomorrow to lubricate etc the piano action and I am planing on at least one hour on either end to dismantle and reassemble the reproducer assembly, Ken Gerler ----- Original Message ----- From: Robert A. Anderson <fndango@azstarnet.com> To: <pianotech@ptg.org> Sent: Saturday, February 12, 2000 6:35 PM Subject: S&S Duo-Art > I have a new customer with a Duo-Art. I would like to get the action out > for some basic servicing. I am daunted by all the player stuff in the > way. I see that I'll have to remove all the tubes individually from the > top. On the bottom I can unscrew the wooden plates with the tube > connections once I get some other obstacles out of the way. > > Could anyone give me a rundown on the proper way to get the action out? > I'd appreciate knowing about any pitfalls waiting for me. > > Thanks, > > Bob Anderson > Tucson, AZ
This PTG archive page provided courtesy of Moy Piano Service, LLC