Martin, I wouldn't put this off. It only takes a little time to use emory cloth with a shoeshine approach to smooth out the capos. Just because its the first time isn't a reason to skip something important. : } David I. Date sent: Fri, 11 Feb 2000 18:07:57 -0800 From: Martin Dubow <tuner@mediaone.net> To: pianotech@ptg.org Subject: Re: Restringing Send reply to: pianotech@ptg.org > Brian, > > I'm not really planning on anything at this point. When I've got > the strings off, if I'm feeling ambitious I'll take a look at the capo > bar. But considering this is my first restringing, I'll be happy if I > can just get this baby back together, correctly. > > Thanks for your thoughts. > > Martin > > > > Brian Trout wrote: > > > Hi Martin, > > > > I would normally use a fine cut metal file. The cast iron isn't really that > > hard, and it won't likely take much filing. I've never tried to do it to a > > plate that was still in the piano. It might be a little harder, but > > certainly not impossible. > > > > Are you planning to take the plate out of the piano and give it a fresh coat > > of paint? If you are, that would be the perfect opportunity to turn the > > little fellow over and check the capo bar out up close and personal. If > > you're not taking it out, it will be a little awkward, and you might find a > > mirror to be quite helpful. > > > > Normally, I don't like to take off any more metal than I need to. My > > objective is a nice smooth termination point, which it's not really a point, > > but a rounded over place. How round? Good question. I've heard figures > > tossed about, but one rebuilder told me something on the order of a 3/16" > > size drill bit is about what he likes. I wouldn't go nuts over it. You > > get the idea. > > > > I hope that'll help. Perhaps others will have some input as well. > > > > Good luck, > > > > Brian Trout > > Quarryville, PA > > btrout@desupernet.net > > > > ----- Original Message ----- > > From: Martin Dubow <tuner@mediaone.net> > > To: <pianotech@ptg.org> > > Sent: Friday, February 11, 2000 7:32 PM > > Subject: Re: Restringing > > > > > Hi, Brian, > > > > > > When you say dress up the grooves in the capo bars (if they're > > > too roomy), what would you use to do that with? > > > > > > Thanks. > > > > > > Martin > > David Ilvedson, RPT Pacifica, CA ilvey@jps.net
This PTG archive page provided courtesy of Moy Piano Service, LLC