Thanks for the reply Wim. These were very soft and they polished like brass, but no pits. Were your zinc ones soft? Richard Anderson > From: Wimblees@AOL.COM > Reply-To: pianotech@ptg.org > Date: Wed, 2 Feb 2000 09:46:05 EST > To: pianotech@ptg.org > Subject: Re: Pewter Kimball hinges? > > In a message dated 2/1/00 5:13:11 PM !!!First Boot!!!, tknostf@foxvalley.net > writes: > > << I just finished blasting the hardware on a 1916 Kimball grand. It was all > solid brass except for the continuous hinges. They are silver and non > magnetic (the hinge rod is brass). I don't think they were plated although > it's hard to tell because the piano had been painted (white with gold > accents and a portrait of George Washington, or is it Martha - see link > below). What metal do suppose this is? > > Richard Anderson >>> > > > The hinge most likely is made out of zinc. I brought a couple of hinges like > that to my plater. He brass plated it, but it did not look good. It comes out > pitted. > > Wim >
This PTG archive page provided courtesy of Moy Piano Service, LLC