Danger technical content!!

[Delwin D Fandrich]

----- Original Message -----
From: <JIMRPT@AOL.COM>
To: <pianotech@ptg.org>
Sent: December 20, 2000 7:01 AM
Subject: Danger technical content!!


> Et Al;
>  Well this year I searched for THE item dejure and settled on a 1/2 ton
> bearing press. :-)

>  What I bought it for was to press out old keyweights and to press in new
> keyweights. It also will do an exemplary job of expanding the weight to
stay
> snug in the hole.
>  I have made several different sized 'tips' to fit on the press drift to
> match different sized weights. In addition I have made an 'asterick'
shaped
> tip for expanding all size weights.

-------------------------------------------------------

With suitable 'tips,' they also work quite nicely for pressing in capstans,
backchecks, etc.

Del