Hi, For chipping, I think I just use page 0, as is, and do the first 3 notes by ear. At least that is what I think I did. Regards, John M. Ross Windsor, Nova Scotia, Canada. piano.tech@ns.sympatico.ca ----- Original Message ----- From: <JIMRPT@AOL.COM> To: <pianotech@ptg.org> Sent: Sunday, December 10, 2000 7:58 PM Subject: Re: SAT Mystery > Dick Day wrote; > <<" ........................Or anybody that can solve this > mystery.">> > > Dick; > I have tried doing the same thing that you describe...it don't work. :-) > Stored tunings in the SAT have something stored for that tuning but it is the > partial rather than the fundemental..as I understand it. Thus the SAT may > tell you something that you don't understand but it demands that what you > tell it be understandable. In other words a 'stored tuning' can't be used for > chipping purposes or even for vast movements of the strings such as in the > first tuning on a new set of strings. In order for the SAT to give you > accurate readings that you can understand the tuning has to be closer than > you will find in a typical first tuning. > The way to use the SAT to get in the ballpark on the 'first' tuning is just > use the generic semi chromatic tuning that pops up after you push the "tune" > button right after turning th unit on. Tune through one time with that and > then the 'stored tunings' will work just fine. I usually tune thingees twice > on the 'generic' tuning before calculating FAC numbers for that particular > instrument. After FAC numbers are figured I store that tuning in a page I use > for rebuilding and use it from then on. Why does this seem to work ? I don't > know...... but it seems like Dr. Coleman explained that the 'generic' tuning > button uses the fundemental only ? > Jim Bryant (FL) >
This PTG archive page provided courtesy of Moy Piano Service, LLC