This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment List I inspected two Steinway B's at a nearby college that is hosting an = international piano recital and wants the instruments "cosmetically = improved." The cases appear to be in good condition except for the = custodial dings and dents from daily use. I was actually quite surprised = by their condition. The question raised: can they be dent filled, = topcoated and buffed to make them stage worthy. The college is not = interested in total refinishing, too expensive. I've done this in the = passed with traditional lacquer methods, but I want to know if I can do = it with water based lacquer. I've been spraying finishes for a long time = but have yet to make the leap into water based. I gather from what I = read from venders that this would be possible, but I'd like to hear from = someone who has/is doing it and what they are running into. I'm familiar = with dent work from Bondo to Konig, and finish prep and spraying for = solvent base coatings. My concern is getting the water based to stick to = the old finish. I plan on buying a new gun for this finish and making = technique adjustments as required. Right now I'm favoring the gravity = feed model for compressed air. What are your thoughts concerning the = pianos and the type of spray gun you have and the brands of water based = lacquers you are using and why. I'd appreciate any input. Thanks. Paul Chick ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/5c/3f/41/28/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC