loose hammer heads

[RptBob1@AOL.COM]

---------------------- multipart/alternative attachment
In a message dated 12/5/2000 10:02:30 PM Mid-Atlantic Standard Time, 
cedel@supernet.com writes:


> How would you recommend I reglue these?
> 
> In pianos where there are just one or two loose, I generally just work
> it off and reglue.  Is there danger in breaking the butt or flange by
> doing this?  I think I've heard of turning the action upside down and
> using the water-thin CA on the loose ones.  I've never done that.
> Advice?
> 
> Hi Clyde:
> 
> I wouldn't use the CA method (turning upside down, etc.) but would pop off 
> the loose and/or clicking hammers-presuming you have the correct tools to 
> accomplish this.  I would reglue with yellow or white glue.  I feel CA 
> might make it difficult to remove these hammers at some future date if you 
> 

Bob Bergantino,RPT
Willoughby Hills, Ohio

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/22/6c/2b/d8/attachment.htm

---------------------- multipart/alternative attachment--