---------------------- multipart/alternative attachment If it is the one which curves upwards at the center pin, I have one in my parts bin. Make me an offer I can't refuse :-) Jon Page At 03:58 PM 12/05/2000 -0800, you wrote: >Hi, David, Thanks for responding and for the offer. >Actually I only need one of those flanges, the brass >kind that clamps onto the center pin. If you can >locate one, please tell me how much you want for it, >including shipping. I'm not familiar with pianophile. >What's that? Thanks again, Les Conover > > > > > >--- David Renaud <studiorenaud@qc.aibn.com> wrote: > > Pianophile also has/had some. > > > > I have a few extra laying about my shop(somewhere) > > ,left over form a Chickering rebuild, > > if a supplier fails to come up with them, and you > > only > > need a few, you can ask me for them.. > > > > Cheers > > David Renaud > > > > Les Conover wrote: > > > > > Hello. Does anyone know of a source of the brass > > > flanges used on Chickering grand hammershanks 80 > > to > > > 100 years ago? I've check all the suppliers I > > know > > > of. > > > > > >===== >Les Conover, RPT >NM Chapter >Albuquerque, NM > >__________________________________________________ >Do You Yahoo!? >Yahoo! Shopping - Thousands of Stores. Millions of Products. >http://shopping.yahoo.com/ Jon Page, piano technician Harwich Port, Cape Cod, Mass. mailto:jonpage@mediaone.net ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/54/25/80/02/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC