Garrett - "G" Piano Works: Grand 8 hrs.; Vertical 9 hrs.; Spinet 10 hrs. I don't know if this includes repinning (I have that type of difficulty sometimes using his labor guide (although I still think it is really great!)). His labor for flange replacement is 5 hrs, 5.5 hrs., and 6 hrs. respectively. Perhaps you might consider contacting someone from the Renner "Dream Team" or Wally Brooks and just get a new set. Double flanges? Sounds to me like double the reasons to get new. Good luck. Let's hear what you decide. Terry Farrell Piano Tuning & Service Tampa, Florida mfarrel2@tampabay.rr.com ----- Original Message ----- From: "Allan L. Gilreath, RPT" <agilreath@mindspring.com> To: <pianotech@ptg.org> Sent: Monday, August 28, 2000 6:22 PM Subject: rebushing without getting bushed > List, > > Does anyone have an approximate labor time to rebush a set of flanges? Any > difference for double flanges? > > Thanks, > > Allan > Allan L. Gilreath, RPT > Assistant Director - TEAM2001 > July, 2001 - Reno, NV > agilreath@mindspring.com > http://www.equaltemperament.com/ptg/ > Director: Laura Olsen, RPT > Assistant Directors: Allan Gilreath, RPT - Gary Neie, RPT - Vince Mrykalo, > RPT - Dale Probst, RPT > >
This PTG archive page provided courtesy of Moy Piano Service, LLC