Jim, What type of finish are you using? And did you use a silicone scavenger? Wally Wilson, RPT WV Columbus, OH chapter jim krentzel wrote: > List, > I've refinished pianos for over 15 years, but a grand that I'm working on > now has me stumped. The entire piano has refinished just fine with the > exception of the large lid. After the second series of sealer coats, the > finish develops small bubbles. The bubbles feel like bumps about the size > of a pin head, but after wet-sanding, they are small craters, so I know they > were actually bubbles in the finish. After the first time this happened, I > stripped the lid again and started over. I had the normal amount of > fish-eye on the lid, but it went away after the first 4 coats of sealer > (with fish-eye eliminator) were wet-sanded flat. Then after the 4th added > sealer coat, the bubbles appeared. I'd appreciate any suggestions. > Jim Krentzel
This PTG archive page provided courtesy of Moy Piano Service, LLC