freedom from the wire

[Dick Beaton]

All....
My solution was to throw the dang foot switch away!
I then mounted a switch on a small magnet.  I stick it on a convenient irion
place on  the piano such as the plate.  I also put a small piece of velcro
on the upper right hand corner of the SAT and a matching piece on the wire.
This takes the tension off the wire at the plug in the rear of the SAT.
Been using it for several years and like it a lot.
Hope this helps.
Dickl RPT MT

----- Original Message -----
From: Robert Goodale <rrg@nevada.edu>