>I'm doing some work on a 1921 Steinway O, and am faced with a broken screw > imbedded in the hammer rail. It is too small for my #1 screw extractor. > How can I get it out? Greetings, You may have to drill it out, plug the hole, and retap. But if you can get a very small Dremel cut-off blade to it, you may be able to cut a slot, and then turn it out with a small screwdriver. Good luck, this is a tough one. Regards, Ed Foote
This PTG archive page provided courtesy of Moy Piano Service, LLC