Tom I came close to buying this one. Didn't have the bucks, so I built my own. How do you set the strike angle, or do you use a radial drill press? Paul Chick ----- Original Message ----- From: Thos. D. Carpenter <carpthos@televiso.com> To: <pianotech@ptg.org> Sent: Friday, April 14, 2000 1:55 AM Subject: Re: Hammer Boring Jigs > I use Renner`s........it`s fabulous. All other`s seem to need a few > modifications to get them to work like you`d like. > Tom > -----Original Message----- > From: A440PNO2NR@AOL.COM <A440PNO2NR@AOL.COM> > To: pianotech@ptg.org <pianotech@ptg.org> > Date: Thursday, April 13, 2000 9:07 PM > Subject: Hammer Boring Jigs > > > >Would anyone care to make any recommendations for a good hammer boring jig. > >I've always used the standard bore and thought I'd like to drill a set > myself > >this time. > > > >Thanks in advance, > >Bill Costanzo > >Rochester NY >
This PTG archive page provided courtesy of Moy Piano Service, LLC