Take a spatula, and check the integrety of the sound board to liner glue joint, also check to see if the glue joint of the bridge is sound. Finally the pin block to back assembly glue joint. Roger At 02:23 PM 01/04/00 -0500, you wrote: >I have a Baldwin Hamilton that I have been tuning for a while and it never >seems to hold tune no matter how many passes I always find the center moving >up or down 4-6 cents before IM done. Yes, I tried tightening the plate >checked for a bad pins, etc., cannot seem to locate the problem. Is this a >bridge roll? The piano has a climate control in it and so I dot suspect the >climate. Any thoughts? > Roger Jolly Saskatoon, Canada. 306-665-0213 Fax 652-0505
This PTG archive page provided courtesy of Moy Piano Service, LLC