Pin Block

[ETomlinCF3@AOL.COM]

>From ANY piano supplier.  Schaff, Pianotek, et al.

Ed
<< Where can I order larger tuning pins from?
 
 ETomlinCF3@AOL.COM wrote:
 
 > It would likely be better to properly put the new block in, Delignit or 
not.
 > The other block is likely older and probably needed replacing any way.
 > Delignit blocks are good and so are others mentioned previously.  The 
correct
 > installation is very important.  If you are unsure or this is your first 
and
 > you will be going it alone, then I may suggest using the same block.  
Putting
 > a new block in improperly is obviously not a superior method to using the 
old
 > block with larger pins.
 >
 > Ed Tomlinson
 >
 > << This is for a Mason and Hamlin.  So, would a 41-ply Delignit block have 
a
 >  more reliable tuning hold than the 7 ply that is in there now?
 >   >>
 
  >>