Pin Block

[Matthew Todd]

Where can I order larger tuning pins from?

ETomlinCF3@AOL.COM wrote:

> It would likely be better to properly put the new block in, Delignit or not.
> The other block is likely older and probably needed replacing any way.
> Delignit blocks are good and so are others mentioned previously.  The correct
> installation is very important.  If you are unsure or this is your first and
> you will be going it alone, then I may suggest using the same block.  Putting
> a new block in improperly is obviously not a superior method to using the old
> block with larger pins.
>
> Ed Tomlinson
>
> << This is for a Mason and Hamlin.  So, would a 41-ply Delignit block have a
>  more reliable tuning hold than the 7 ply that is in there now?
>   >>