In a message dated 10/19/1999 10:24:07 AM, skline@proaxis.com writes: << If you take a small felt-tip marker, and draw a line across the sticker where it comes out of the old elbow, and turn the new ones on to match, you'll have almost no lost motion to do afterwards. >> Susan; A method I prefer is using a small pair of vice grips. If you place/clamp the jaws at the top of, and flush to, the old elbow.......... you can then remove all remnants of the old elbow, secure the wire and turn the new one on until it bottoms out against the vice grip jaws, thereby almost exactly duplicating the position of the old elbow. Jim Bryant (FL)
This PTG archive page provided courtesy of Moy Piano Service, LLC