Paul, Use the thick CA glue and wipe on molding and felt where the seperation is and hold together with pliers. Use a pencil or another way to drip a drop of activator along the molding as you hold the felt for a minute until it sets up. Joe Goss ----- Original Message ----- From: Paul McCloud <smccloud@ix.netcom.com> To: <pianotech@ptg.org> Sent: Monday, October 11, 1999 7:07 PM Subject: Re: Adhesives > Anybody got a good adhesive for hammer felts that have come loose from > the moulding? I have an otherwise junk piano in which almost all the > hammers have felts which are loose. It's an old spinet, and we will > sell it for cheap when it's done. New hammers aren't in the stars for > this piano. > Thanks, > Paul McCloud > San Diego > >
This PTG archive page provided courtesy of Moy Piano Service, LLC