My fix for this has always been to cut the wire in back of the break and if the plug has not been damaged, just unsolder the old wires and resolder the trimmed off old wires. Shielded wire would work but is not necessary. If your cable gets too short, you can take the foot switch apart and replace the cable completely with or without a new plug. Done it many times. Norm Barrett Memphis, TN Ed Carwithen wrote: > The wire on the foot pedal of my SAT has developed a break right at the > plug end. My friendly Radio Shack has all kinds of plugs, but none like > this. The break is too close to the plug to repair. I don't need a new > foot pedal for $75. I need a new plug for $1.89, and some wire. The plug > is 3/32" and 9/16th" long. Anybody know where I can get a replacement????? > > Ed Carwithen > John Day
This PTG archive page provided courtesy of Moy Piano Service, LLC