Thanks Robert, I'll look into the gun brush. Terry Beckingham At 08:01 AM 6/11/99 -0500, you wrote: >I completely agree with the previous two recommendations-- Don't use the damn >things! I call things like this "decision makers". They are for when you >can't decide if you want to replace the block or not. Just use the reamers, >ruin the block, and then your decision has been made for you! > >Rob Goodale, RPT > > > > > >Terry Beckingham wrote: > >> Hi Gang, >> >> I am about re repin with 3/0 pins. I have purchased the appropriate reamer, >> but I have not used one before. I assume that it is used in an electric >> drill, but I don't know at what speed it should turn, or how long to ream >> each hole. Any pointers would be appreciated. >> >> Thanks in advance. >> >> Terry Beckingham >> Associate Member > >
This PTG archive page provided courtesy of Moy Piano Service, LLC